Here is a pic of the rad bracket installed.I wont drill the holes for the rad just yet.I will wait and get some of the hoses to gauge exactly the best location.
Unfortunately my car cover has a small rip in it,and it has rained alot over the past few days.The drivers side floor filled up with water.I had to drill a small hole in the floor to drain out the water,and where there was small bits of swarf from drilling holes in the chassis,rust spots have formed all over the floor.Most of these have just wiped off,as I generously sprayed the floor with wd40 afted fitting it,but some might need a bit of a scrub!!
Not the end of the world,but it does look really messy.
1 comment:
Controlling the engine is the most processor-intensive job on your car, and the ECU upgrads the most powerful computer on most cars. The ECU uses closed-loop control, a control scheme that monitors outputs of a system to control the inputs to a system, managing the emissions and fuel economy of the engine (as well as a host of other parameters).
Post a Comment